Adjustable Thin-strip Jig | Popular Woodworking


We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Here is my adjustable jig for ripping thin strips on a table saw. Used with a push stick and zero-clearance insert, it keeps my hands a safe distance away from the sawblade.

The base is MDF that’s 34” thick x 6″ wide x 22″ long. The width of the jig keeps my hand away from the sawblade, and the length of the base accommodates longer stock. The handle, which is shaped for comfort and angled forward, helps the jig stay firmly pressed against the table saw’s fence. Secure the handle 7″ from the back edge of the base with glue and screws.

The adjustable backer block is made from 516“-thick hardboard (or straight-grained hardwood) and can be adjusted to support the entire width of the thin strips. I milled the slots on my router table and used 112“- long coarse-thread washer-head screws to secure the backer block to the jig’s base.

I use a push stick to keep the workpiece tight against the jig until it reaches the sawblade. -Serge Duclos


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.





Source link

We will be happy to hear your thoughts

Leave a reply

RigalShop
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0
Shopping cart