We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
When I crosscut hardwood plywood, I use an old technique to minimize tearout on the bottom face. I simply make two passes with my general-purpose blade. After setting the rip fence, I cut a shallow groove, no more than 1/32 in. deep. Then I raise the blade and cut all the way through. Cutting plywood this way takes longer, but I’m not in a hurry and the tear-out-free results are worth the extra effort. —Eric Swanson
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.